Afraid to use a Tyre Sealant? Quite rightly so! The tyre sealants available in the market cause more harm than good with side effects like
● Wobbling at High Speeds (Does not support tyre balancing)
● Rim Corrosion
● Sensitivity to temperature changes causing hard lumps or flakes inside the tyre
● Massing when the vehicle is not used for long durations
● Tyre Sealant expires in a year requiring a refill
● Tyre Sealants react with the tyre and often void the tyre manufacturer warranty
● Tyre Sealants damage the tyre valve
Formula X overcomes all these problems to offer you a puncture free solution with zero side effects. Formula X is a Do It Your Self solution of Tyroseal by Tyre Protector which is successfully ARAI tested (Automotive Research Association of India) and manufactured with an ISO 9001 awarded process in the UK. Let us understand as to how Formula X overcomes these shortcomings
Formula X supports Tyre Balancing and offers high speed stability even at speeds beyond 200 kmph. Unlike liquids Formula X is a Thixotropic Propylene Glycol based gel when correctly installed is designed to form a permanent 2mm coating inside the tyre. This coat evenly distributes the gel across the tyre thus becoming a part of the tyre itself. Unlike liquid sealants this does not move in the tyre and supports tyre balancing. Hence Formula X is the most sought after puncture proofing solution by professional and expert motorcyclists
Formula X has infact non corrosive properties and will prevent rim corrosion. A point to be noted here however is that if correctly installed Formula X will form the coat on the inner surface of the tyre. It is not meant to come in contact with the rim.
Formula X formulation is THIXOTROPIC, one of our distinct feature that allows Formula X to withstand heat and the shear forces created within a rotating Tyre. The thixotropic suspension has the ability to stretch and recover under mild to severe exposure of the adverse forces and continuously clings to the inner surface of the Tyre /wheel. This ability to evenly coat the inner surface against adverse conditions and centrifugal force is the reason that Formula X Gel will not adversely affect a balanced Tyre /wheel and will not lose the ability to provide protection for the tread life of the Tyre. Formula X is used extensively in Scandinavia and Australia where temperatures reach plus and minus 45 degrees. And it is also used in Africa which has a very hot climate. The gel is designed to perform efficiently across climatic conditions.
Formula X coat will not be affected even if the vehicle remains parked for months.
Formula X coat has a shelf life of up to 10 years and hence will continue to work effectively without a refill until the legal life of the tyre i.e. until your tyre retains its rubber memory
As Formula X is chemically inert and water soluble it does not affect the components of the tyre and will not affect the manufacturer’s warranty. In case you wish to claim the warranty for your tyre Formula X can be easily washed with water to leave no traces.
It is important that you follow step by step instructions to install Formula X. Clearing the valve using the drain snake or by blowing air will ensure that the tyre valve is not damaged